Filters
Question type
Study Flashcards

Cannizzaro Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 40,000 machine-hours,total fixed manufacturing overhead cost of $248,000,and a variable manufacturing overhead rate of $3.80 per machine-hour. Required: Calculate the predetermined overhead rate for the year.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Doakes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Doakes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Recently,Job M843 was completed with the following characteristics: The unit product cost for Job M843 is closest to: A) $33.75 B) $67.50 C) $27.50 D) $50.50 Recently,Job M843 was completed with the following characteristics: Doakes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Recently,Job M843 was completed with the following characteristics: The unit product cost for Job M843 is closest to: A) $33.75 B) $67.50 C) $27.50 D) $50.50 The unit product cost for Job M843 is closest to:


A) $33.75
B) $67.50
C) $27.50
D) $50.50

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job A is closest to: A) $14,400 B) $15,120 C) $28,512 D) $29,520 During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job A is closest to: A) $14,400 B) $15,120 C) $28,512 D) $29,520 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job A is closest to:


A) $14,400
B) $15,120
C) $28,512
D) $29,520

E) C) and D)
F) All of the above

Correct Answer

verifed

verified

Vasilopoulos Corporation has two production departments,Casting and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Vasilopoulos Corporation has two production departments,Casting and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A182.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the estimated total manufacturing overhead for the Assembly Department. c.Calculate the predetermined overhead rate for the Casting Department. d.Calculate the predetermined overhead rate for the Assembly Department. e.Calculate the total amount of overhead applied to Job A182 in both departments. f.Calculate the total job cost for Job A182. g.Calculate the selling price for Job A182 if the company marks up its unit product costs by 20% to determine selling prices. During the current month the company started and finished Job A182.The following data were recorded for this job: Vasilopoulos Corporation has two production departments,Casting and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A182.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the estimated total manufacturing overhead for the Assembly Department. c.Calculate the predetermined overhead rate for the Casting Department. d.Calculate the predetermined overhead rate for the Assembly Department. e.Calculate the total amount of overhead applied to Job A182 in both departments. f.Calculate the total job cost for Job A182. g.Calculate the selling price for Job A182 if the company marks up its unit product costs by 20% to determine selling prices. Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the estimated total manufacturing overhead for the Assembly Department. c.Calculate the predetermined overhead rate for the Casting Department. d.Calculate the predetermined overhead rate for the Assembly Department. e.Calculate the total amount of overhead applied to Job A182 in both departments. f.Calculate the total job cost for Job A182. g.Calculate the selling price for Job A182 if the company marks up its unit product costs by 20% to determine selling prices.

Correct Answer

verifed

verified

a.Casting Department overhead cost = Fix...

View Answer

Parido Corporation has two manufacturing departments--Casting and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Parido Corporation has two manufacturing departments--Casting and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job A and Job H.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to: A) $8,328 B) $26,372 C) $18,316 D) $18,044 During the most recent month,the company started and completed two jobs--Job A and Job H.There were no beginning inventories.Data concerning those two jobs follow: Parido Corporation has two manufacturing departments--Casting and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job A and Job H.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to: A) $8,328 B) $26,372 C) $18,316 D) $18,044 Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to:


A) $8,328
B) $26,372
C) $18,316
D) $18,044

E) A) and B)
F) All of the above

Correct Answer

verifed

verified

Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K928. The following data were recorded for this job: -The total amount of overhead applied in both departments to Job K928 is closest to: A) $1,405 B) $2,000 C) $810 D) $595 During the current month the company started and finished Job K928. The following data were recorded for this job: Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K928. The following data were recorded for this job: -The total amount of overhead applied in both departments to Job K928 is closest to: A) $1,405 B) $2,000 C) $810 D) $595 -The total amount of overhead applied in both departments to Job K928 is closest to:


A) $1,405
B) $2,000
C) $810
D) $595

E) C) and D)
F) B) and C)

Correct Answer

verifed

verified

Kostelnik Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $237,000, variable manufacturing overhead of $3.90 per machine-hour, and 30,000 machine-hours. The company has provided the following data concerning Job A496 which was recently completed: Kostelnik Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $237,000, variable manufacturing overhead of $3.90 per machine-hour, and 30,000 machine-hours. The company has provided the following data concerning Job A496 which was recently completed: -The unit product cost for Job A496 is closest to: A) $133.00 B) $72.20 C) $45.05 D) $180.20 -The unit product cost for Job A496 is closest to:


A) $133.00
B) $72.20
C) $45.05
D) $180.20

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Gerstein Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.70 per direct labor-hour, and 50,000 direct labor-hours. The company recently completed Job M800 which required 150 direct labor-hours. -The predetermined overhead rate is closest to:


A) $26.40
B) $25.14
C) $23.43
D) $24.60

E) A) and C)
F) C) and D)

Correct Answer

verifed

verified

Bulla Corporation has two production departments,Machining and Customizing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Bulla Corporation has two production departments,Machining and Customizing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job K369.The following data were recorded for this job: Required: Calculate the total amount of overhead applied to Job K369 in both departments. During the current month the company started and finished Job K369.The following data were recorded for this job: Bulla Corporation has two production departments,Machining and Customizing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job K369.The following data were recorded for this job: Required: Calculate the total amount of overhead applied to Job K369 in both departments. Required: Calculate the total amount of overhead applied to Job K369 in both departments.

Correct Answer

verifed

verified

Machining Department:
Machining Departme...

View Answer

In absorption costing,nonmanufacturing costs are assigned to units of product.

A) True
B) False

Correct Answer

verifed

verified

Job 243 was recently completed.The following data have been recorded on its job cost sheet: Job 243 was recently completed.The following data have been recorded on its job cost sheet: The company applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $11 per machine-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job. The company applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $11 per machine-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job.

Correct Answer

verifed

verified

Quiet Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 40,000 machine-hours,total fixed manufacturing overhead cost of $152,000,and a variable manufacturing overhead rate of $3.10 per machine-hour. Required: Calculate the estimated total manufacturing overhead for the year.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to: A) $19,136 B) $5,940 C) $30,888 D) $24,948 During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to: A) $19,136 B) $5,940 C) $30,888 D) $24,948 -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The amount of manufacturing overhead applied to Job H is closest to:


A) $19,136
B) $5,940
C) $30,888
D) $24,948

E) All of the above
F) A) and C)

Correct Answer

verifed

verified

Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to: A) $71,983 B) $65,439 C) $43,626 D) $21,813 During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to: A) $71,983 B) $65,439 C) $43,626 D) $21,813 -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to:


A) $71,983
B) $65,439
C) $43,626
D) $21,813

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Fatzinger Corporation has two production departments,Milling and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Milling Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Fatzinger Corporation has two production departments,Milling and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Milling Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: The predetermined overhead rate for the Assembly Department is closest to: A) $8.20 per direct labor-hour B) $3.40 per direct labor-hour C) $4.06 per direct labor-hour D) $11.60 per direct labor-hour The predetermined overhead rate for the Assembly Department is closest to:


A) $8.20 per direct labor-hour
B) $3.40 per direct labor-hour
C) $4.06 per direct labor-hour
D) $11.60 per direct labor-hour

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Boward Corporation has two production departments,Milling and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Milling Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Boward Corporation has two production departments,Milling and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Milling Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job T818.The following data were recorded for this job: The total amount of overhead applied in both departments to Job T818 is closest to: A) $1,651 B) $608 C) $435 D) $1,043 During the current month the company started and finished Job T818.The following data were recorded for this job: Boward Corporation has two production departments,Milling and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Milling Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job T818.The following data were recorded for this job: The total amount of overhead applied in both departments to Job T818 is closest to: A) $1,651 B) $608 C) $435 D) $1,043 The total amount of overhead applied in both departments to Job T818 is closest to:


A) $1,651
B) $608
C) $435
D) $1,043

E) B) and D)
F) A) and B)

Correct Answer

verifed

verified

Tarrant Corporation has two manufacturing departments--Casting and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Tarrant Corporation has two manufacturing departments--Casting and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Casting Department is closest to: A) $5.70 B) $1.30 C) $5.96 D) $7.00 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Casting Department is closest to:


A) $5.70
B) $1.30
C) $5.96
D) $7.00

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Huang Aerospace Corporation manufactures aviation control panels in two departments,Fabrication and Assembly.In the Fabrication department,Huang uses a predetermined overhead rate of $30 per machine-hour.In the Assembly department,Huang uses a predetermined overhead rate of $12 per direct labor-hour.During the current year,Job #X2984 incurred the following number of hours in each department: Huang Aerospace Corporation manufactures aviation control panels in two departments,Fabrication and Assembly.In the Fabrication department,Huang uses a predetermined overhead rate of $30 per machine-hour.In the Assembly department,Huang uses a predetermined overhead rate of $12 per direct labor-hour.During the current year,Job #X2984 incurred the following number of hours in each department: What is the total amount of manufacturing overhead that Huang should have applied to Job #X2984 during the current year? A) $1,200 B) $1,500 C) $1,560 D) $1,734 What is the total amount of manufacturing overhead that Huang should have applied to Job #X2984 during the current year?


A) $1,200
B) $1,500
C) $1,560
D) $1,734

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Sutter Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Sutter Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently,Job T369 was completed with the following characteristics: If the company marks up its unit product costs by 20% then the selling price for a unit in Job T369 is closest to: A) $324.56 B) $304.56 C) $277.20 D) $50.76 Recently,Job T369 was completed with the following characteristics: Sutter Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently,Job T369 was completed with the following characteristics: If the company marks up its unit product costs by 20% then the selling price for a unit in Job T369 is closest to: A) $324.56 B) $304.56 C) $277.20 D) $50.76 If the company marks up its unit product costs by 20% then the selling price for a unit in Job T369 is closest to:


A) $324.56
B) $304.56
C) $277.20
D) $50.76

E) All of the above
F) A) and C)

Correct Answer

verifed

verified

Opunui Corporation has two manufacturing departments--Molding and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Opunui Corporation has two manufacturing departments--Molding and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job M. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job M is closest to: A) $10,830 B) $7,400 C) $25,730 D) $7,500 During the most recent month, the company started and completed two jobs--Job A and Job M. There were no beginning inventories. Data concerning those two jobs follow: Opunui Corporation has two manufacturing departments--Molding and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job M. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job M is closest to: A) $10,830 B) $7,400 C) $25,730 D) $7,500 -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job M is closest to:


A) $10,830
B) $7,400
C) $25,730
D) $7,500

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Showing 81 - 100 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer